MATERIAL PROFILE
Cutting ceramic tile
Ceramic tile is not cut by conventional teeth. Small notches may use carbide or diamond grit, while long clean cuts usually belong on a tile-specific system.
QUICK ANSWER
Build a Ceramic tile setup Blade choice starts with the cutting system.
Use a tile-rated method and dust or wet controls appropriate to the tool.
REVIEWED PAIRINGS
1 saw family in the current matrix
Each pairing below has a dedicated answer. Absence is intentional; it is not permission to improvise.
SawDefault priorityUse case
JigsawClean edgeCurves, cutouts, and controlled sheet cutsMATERIAL BEHAVIOR
What changes the recommendation
Risk to control
Cracking, silica-containing dust, and poor edge quality.
Preparation
Use a tile-rated method and dust or wet controls appropriate to the tool.
Thickness and form
A solid section, thin wall, sheet, tube, or profile can need a different pitch even when the material name stays the same. Use the blade finder with the actual wall or cut thickness.