MATERIAL PROFILE
Cutting acrylic
Acrylic is stiff and clear but cracks from vibration and melts when heat is not carried away by chips.
QUICK ANSWER
Build a Acrylic setup Blade choice starts with the cutting system.
Leave protective film in place, support closely, and use a steady feed that produces chips rather than dust.
REVIEWED PAIRINGS
4 saw families in the current matrix
Each pairing below has a dedicated answer. Absence is intentional; it is not permission to improvise.
MATERIAL BEHAVIOR
What changes the recommendation
Risk to control
Melting, crazing, and edge cracking.
Preparation
Leave protective film in place, support closely, and use a steady feed that produces chips rather than dust.
Thickness and form
A solid section, thin wall, sheet, tube, or profile can need a different pitch even when the material name stays the same. Use the blade finder with the actual wall or cut thickness.